|
|
Analysis of aromatic compounds in plasma treated onion
Krejsová, Lenka ; Kozáková, Zdenka (referee) ; Krčma, František (advisor)
This bachelor thesis deals with the analysis of fragrances in onions, which were exposed to plasma before planting. The adjustment was made to see if onion growth and yields would improve. The theoretical part deals with the quantitative and qualitative methods for the determination of volatile substances. It contains the principle and instrumentation of mass spectrometry as well as the tandem connection of gas chromatography with mass spectrometry. In the experimental part, a liquid sample was obtained by pressing. After 60 minutes, saturated vapors were analyzed by reactive ionization mass spectrometry (PTR-MS). Thanks to this analysis, the concentration of volatile substances was determined. Some samples were analyzed by gas chromatography with mass spectrometer as detector to identify the compounds, because PTR-MS does not allow distinguishing of isomers. Subsequently, the data were processed and evaluated. From the gathered obtained it is clear that the plasma treatment has an effect on the fragrances concentrations. After six months of storage, the presence of some volatile substances increased due to increased biological activity.
|
|
|
Plasmochemical treatment of substrates and coatings in R2R arrangement
Patakyová, Sylvia ; Homola,, Tomáš (referee) ; Dzik, Petr (advisor)
This bachelor thesis deals with the comparison of the properties of two titanium dioxide types, which is due to its semiconductive properties commercially used in photoactive layers. The main reason for comparing these sources is their different price which can have possible impact on industrial use. Photoactive layers formed by various wet deposition techniques are cured by atmospheric plasma. The effect of plasma on individual depositions is investigated by electroanalytical methods. Voltametric and chronoamperometric characteristics indicate the dependence of the substrate activity on the time or distance of plasma treatment. Surface of composites were scanned by SEM and the mutual surface properties of untreated composites and the effect of siloxane binder on them were analyzed.
|
|
|
Ion-selective membrane with antimicrobial effect
Gablech, Evelína ; Farka,, Zdeněk (referee) ; Soukupová,, Jan (referee) ; Drbohlavová, Jana (advisor)
Tato práce se zabývá zlepšením antimikrobiálních vlastností komerčních polymerních membrán používaných v mlékárenském průmyslu pro filtraci mléčných výrobků jako je syrovátka. Tyto membrány trpí kontaminací způsobenou mikroorganismy přítomnými v mléce během procesu filtrace. Toto biologické znečištění ovlivňuje životnost membrány i samotný filtrační proces. Pro ochranu membrány před vytvořením biofilmu z mikroorganismů byly tyto membrány modifikovány pomocí plazmových metod tak, aby došlo k funkcionalizaci aminovými skupinami pro následnou imobilizaci nanočástic stříbra a selenu. Antimikrobiální aktivita obou typů nanočástic a membrán s imobilizovanými nanočásticemi byla stanovena proti buněčným kmenům Staphylococcus aureus a Escherichia coli.
|
|
|
Nanoparticle treatment technology to improve their dispersibility for use in cemt composites
Závacký, Jakub ; Sťahel,, Pavel (referee) ; Hela, Rudolf (advisor)
The diploma thesis deals with the possibility of using the addition of nanoparticles to improve the properties of cement composites. The theoretical part summarizes the findings of research in this area with a focus on methods of dispersion of nanoparticles and their treatment for use in cement composites. The experimental part focuses on the comparison of methods of dispersion and plasma treatment of reduced graphene oxide (rGO) nanoparticle solutions from the point of view of the agglomeration process. During this work, a method of systematic optical/visual monitoring of sedimentation/agglomeration was developed to complement sophisticated methods such as spectrophotometry (UV/Vis) and electron microscopy (SEM). Furthermore, the effect of the addition of rGO on the properties of cement mortar, in the form of aqueous solutions prepared by the dispersion methods determined in the previous section, was investigated.
|
|
|
Preparation and Plasmachemical Reduction of Model Corrosion Layers on Iron.
Sázavská, Věra ; Novák, Stanislav (referee) ; Zahoranová, Anna (referee) ; Krčma, František (advisor)
The plasmachemical removal process of corrosion layers is based on a reduction effect of RF hydrogen low-pressure plasma, and it is used for archaeological objects. Incrustation layers on artifact surface become brittle and porous due to plasma processing. The structure and composition of corrosion layers is changed. Therefore, it is much easier to recover the original surface of the plasma treated artifacts in contrary to those treated by conventional ways. Moreover, we can save time on invasive and thus dangerous mechanical removal of corrosion layers as for example sanding is. After plasma treatment, we can observe fine details of the original surface and memory of tools used during its manufacturing. These details are important information on the origin and manufacturing methods of the artifacts. The plasma reduction process leads to the removal of impurities from cavities as well, and a function of mechanical components of archaeological object can be restored. Moreover, chlorides can be easily removed from the corrosion layers and thus any significant post-corrosion is protected. Each archaeological object is original and it has its own “corrosion history”. First, the object had been exposed to the atmosphere for a long time. Then, it had been often placed in a tomb or grave or it otherwise got into the soil or sea. Thus, each archaeological object was exposed to different corrosion stress (humidity, composition of corrosive environment, etc.). Due to these facts, any universal way of a corroded object treatment is very difficult or even impossible to propose. In this work, the problem was solved using model samples of common metals which were treated at various plasma treatment conditions. Archaeological objects made of iron are the most common artifacts, and the typical corrosion products on iron are akaganeite, rokuhnite, and szomolnokite. These three corrosion products were created on the model samples in laboratory and then, the plasmachemical reduction was applied for their removal. The experiment was done in a Quartz cylindrical reactor with capacitive coupled RF plasma created using outer electrodes. We used discharge power from 100 W to 400 W in a continuous or pulsed regime (duty cycle of 75 %, 50 % and 25 %). Flowing plasma was created in pure hydrogen at pressure of 150200 Pa. Sample temperature was monitored by a thermocouple, and it did not exceed 200C during all these experiments. This temperature is regarded as a limit temperature for metallographic changes of archaeological iron. Higher temperature can cause destruction of archaeological iron objects. The optical emission spectroscopy of OH radical was used for the process monitoring. We focused on the monitoring of OH-radicals generated in the plasma, which are characteristic species formed by this process. Each corrosion product has a different time evaluation of generated OH-radicals, which is closely related to the degradation of a given corrosion product. Corrosion layers were analyzed before and after the plasmachemical reduction by SEM-EDX. We have found that the plasmachemical reduction is not very suitable for the szomolnokite corrosion product, which is degraded with difficulty and at high applied powers, only. However, very good removal efficiency was obtained for the rokuhnite and akaganeite corrosion.
|
|
|
Plasmochemical treatment of photoanodes with semiconducting oxide layer
Ďurašová, Zuzana ; Zita, Jiří (referee) ; Dzik, Petr (advisor)
This diploma thesis deals with a plasmochemical treatment of photoanodes with an active layer containing TiO2 deposited on two different substrates by material printing. The plasmochemical treatment was performed by a low-temperature ambient-air plasma using a diffuse coplanar surface barrier discharge (DCSBD). The experimental part is focused on the investigation of DCSBD influence on the fabricated photoanodes photoelectrochemical properties, and the influence of plasma treatment time. Process optimization was achieved by height adjustment of the electrode. The processed coatings were electrochemically investigated by linear sweep voltammetry and chronoamperometry.
|
|
|
Advanced preparation of inorganic (ceramic) particles and nanostructures
Šťastná, Eva ; Martinovou,, Lenku (referee) ; Vojtová, Lucy (referee) ; Částková, Klára (advisor)
Elektrostatické zvlákňování (v literatuře též uváděné jako electrospinning) bylo použito pro příprvu čistě polykaprolaktonových nanovláken a kompozitních nanovláken na bázi polykaprolaktonu s hydroxyapatitovými nanočásticemi. Připravená vlákna byla analyzována za použití rastrovací elektronové mikroskopie. Mechanické vlastnosti vláken byly určeny prostřednictvím zkoušky jednoosým tahem. Testy prokázaly silnou závislost mechanických vlastností vláken na jejich směrovém uspořádání a fázovém složení (především přítomnosti hydroxyapatitových částic). Směrové uspořádání vláken přispělo k výraznému zlepšení napětí při přetržení a celkové tažnosti. Zajímavý jev byl pozorován v případě kompozitních vláken– hydroxyapatitové částice zhoršily mechanické vlastnosti neuspořádaných vláken (napětí při přetržení a celkovou tažnost), ale vliv částic nebyl tak patrný v případě směrově uspořádaných vláken. Povrchové vlastnosti vláken byly modifikovány prostřednictvím nízkoteplotní plazmy. Změny povrchových vlastností vláken byly analyzovány pomocí měření kontaktního úhli a XPS analýzy (rentgenové fotoelektronové spektroskopie). Měření kontaktního úhlu ukázalo výrazný vliv plazmového opracování na povrchovou smáčivost vláken, kdy kontaktní úhel byl zcela neměřitelný. Výsledky analýzy ukázaly vliv plazmového opracování struktur na mikroskopické úrovni – plazmové opracování ovlivnilo pouze polymerní složku vláknitých struktur, zatímco hydroxyapatitové částice nebyly ovlivněny vůbec. Na vybraných strukturách bylo provedeno několik biologických zkoušek. Test v simulovaném tělním roztoku prokázal bioaktivitu kompozitních (polykaprolaton/hydroxyapatit) nanovláken prostřednoctví precipitace fází na bázi fosforečnanů vápenatých na povrchu kompozitních struktur. Následné in-vitro buněčné testy (dle normy ISO 10993-5 a WST-8 test) prokázaly významný pozitivní přínos hydroxyapatitových částic ve vláknitých strukturách, stejně jako kladný vliv plazmového opracování, kdy kompozitní oplazmovaná vlákna vykazovala 1,5násobnou bioaktivitu v porovnání s neplazmovanými čistě polykaprolaktonovými vlákny.
|
|
|
Plasma surface modification of powder fillers
Štulrajterová, Lujza ; Bystřický, Zdeněk (referee) ; Přikryl, Radek (advisor)
This bachelor’s thesis deals with the study of particulate-filled composite materials and the influence of filler surface modifications on the properties of the composite. Important aspects of particulate fillers, used fillers and possible surface treatments were characterized in the theoretical section of this work. Dimethacrylate matrix with halloysite nanotubes as filler was chosen as a studied system. The filler was modified by low-temperature plasma under low pressure and by silanization. Surface of the modified filler was studied by Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Particle size distribution was measured by photon cross-correlation spectroscopy and dynamic light scattering (DLS). Mechanical properties of prepared particulate composites were established by the testing of the flexural properties. Fracture areas were analyzed by using scanning electron microscopy (SEM). The results showed no effects of the plasma treatment on the mechanical properties. Silane treatment of the filler surface illustrated improvement of the composite material strength.
|
|
|
Ion-selective membrane with antimicrobial effect
Gablech, Evelína ; Farka,, Zdeněk (referee) ; Soukupová,, Jan (referee) ; Drbohlavová, Jana (advisor)
Tato práce se zabývá zlepšením antimikrobiálních vlastností komerčních polymerních membrán používaných v mlékárenském průmyslu pro filtraci mléčných výrobků jako je syrovátka. Tyto membrány trpí kontaminací způsobenou mikroorganismy přítomnými v mléce během procesu filtrace. Toto biologické znečištění ovlivňuje životnost membrány i samotný filtrační proces. Pro ochranu membrány před vytvořením biofilmu z mikroorganismů byly tyto membrány modifikovány pomocí plazmových metod tak, aby došlo k funkcionalizaci aminovými skupinami pro následnou imobilizaci nanočástic stříbra a selenu. Antimikrobiální aktivita obou typů nanočástic a membrán s imobilizovanými nanočásticemi byla stanovena proti buněčným kmenům Staphylococcus aureus a Escherichia coli.
|
|
|
Analysis of aromatic compounds in plasma treated onion
Krejsová, Lenka ; Kozáková, Zdenka (referee) ; Krčma, František (advisor)
This bachelor thesis deals with the analysis of fragrances in onions, which were exposed to plasma before planting. The adjustment was made to see if onion growth and yields would improve. The theoretical part deals with the quantitative and qualitative methods for the determination of volatile substances. It contains the principle and instrumentation of mass spectrometry as well as the tandem connection of gas chromatography with mass spectrometry. In the experimental part, a liquid sample was obtained by pressing. After 60 minutes, saturated vapors were analyzed by reactive ionization mass spectrometry (PTR-MS). Thanks to this analysis, the concentration of volatile substances was determined. Some samples were analyzed by gas chromatography with mass spectrometer as detector to identify the compounds, because PTR-MS does not allow distinguishing of isomers. Subsequently, the data were processed and evaluated. From the gathered obtained it is clear that the plasma treatment has an effect on the fragrances concentrations. After six months of storage, the presence of some volatile substances increased due to increased biological activity.
|
guest ::
